Fire insulation in buildings
Contents |
[edit] Introduction
Fire occurs as a result of a series of very rapid chemical reactions between a fuel and oxygen that releases heat and light. For combustion to occur, oxygen, heat and a fuel source must all be present; this is the ‘fire triangle’. Flames are the visible manifestation of combustion.
Fire insulation (or more usually fire-rated or fire-resistant insulation) is a term that covers insulation materials which have insulative properties but are also non-combustible or have limited combustibility. As passive fire protection elements, they do not need to be activated to provide fire resistance and hence can help prevent the spread of flame between spaces and components within and between buildings.
By slowing the spread of flame, such materials can protect structure and property and allow people valuable time to escape.
A typical example is stone wool insulation which can be non-combustible. Other types of insulation that may provide fire resistance include mineral wool, fibreglass and cellulose-based wool insulation. Sheep’s wool is regarded as a sustainable insulation solution but must first be treated to make it more fire resistant. Some of these products are available in blankets (supplied in rolls) and/or rigid slabs.
For further information, see Insulation
Fire-rated insulation in a building can be used in a number of places, including in:
- Cladding;
- Floors and ceilings;
- Roofs;
- On structural steel;
- Cavity barriers and firestopping;
- HVAC applications.
In addition to its fire-resisting properties, the insulation used in the above applications may also provide acoustic and thermal insulation.
[edit] Regulations and standards
Part B of the Building Regulations sets out the fire performance requirements of buildings. For a fire-rated insulation to be used in a building it must pass certain British Standard (BS) tests: products are classified according to how they perform in the tests, enabling specifiers and contractors to choose the best fire-rated insulation for a given application. The tests are:
- BS 476-1: Fire tests on building materials and structures, and
- BS EN 13501-1:2018: Fire classification of construction products and building elements (Classification using test data from reaction to fire tests). This has become the construction industry’s main ‘go to’ standard for fire insulation. It provides the reaction to fire classification procedure for all construction products, including products incorporated within building elements with the exception of power, control and communication cables which are covered by EN 13501-6. Products are considered in relation to their end-use application.
BS EN 13501-1:2018 has three fire performance ratings which cover:
- Combustibility (divided into seven classifications from A1 (non-combustible), A2 (limited combustibility) right through to F (easily flammable);
- Smoke emission during combustion (s1 (highest), s2 or s3 (lowest)), and
- The level of production of flaming droplets/particles during combustion (d0 (highest), d1 or d2 (lowest)).
[edit] Grenfell Tower
The 2017 Grenfell Tower Fire is thought to have been exacerbated by ACM cladding which incorporated a Celotex RS5000 PIR insulation. As a result, In December 2018 changes to approved document 7 came into force banning combustible materials in the cladding for buildings over 18m in height.
For more infomation see: Grenfell Tower fire.
[edit] Related articles on Designing Buildings Wiki
- Acoustic insulation
- Acoustic insulation market
- Advice for External Wall Insulation (EWI) systems with a render or brick-slip finish
- Aerogel insulation for buildings
- BR 135 Fire Performance of external thermal insulation for walls of multi-storey buildings
- BREEAM Insulation
- Cavity wall insulation
- Celotex RS5000 PIR insulation
- Designing out unintended consequences when applying solid wall insulation FB 79
- Domestic floors: Part 1: Construction, insulation and damp proofing
- External wall insulation
- Floor insulation
- Grenfell Tower fire
- Icynene spray foam insulation
- Insulation for ground floors
- Loft insulation ruling
- PA ratio for insulation
- Phenolic foam insulation
- Reducing thermal bridging at junctions when designing and installing solid wall insulation FB 61
- Roof insulation
- Solid wall insulation
- Solid Wall Insulation: Unlocking demand and driving up standards
- Sound insulation in buildings
- Sound insulation in dwellings Part 2: New-build (GG 83-2)
- Sound insulation in dwellings: Part 1: An introduction (GG 83-1)
- Sound insulation in dwellings: Part 3: Material change of use (conversions) (GG 83-3)
- Specifying insulation for inverted roofs
- Ten facts about Expanded Polystyrene (EPS) insulation to help specifiers
- Thermal insulation for buildings
- Transparent insulation
- Types of insulation
- Understanding Insulation and the Part It Plays in Building Regulations
- Wall insulation and moisture risk
- Wood and insulation
Featured articles and news
BSRIA Briefing 2024: Sustainable Futures speakers
Redefining Retrofit for Net Zero Living 22 Nov.
Wall of support for post-Grenfell regulation of electricians
Call for a shake-up of the construction industry highlighted on radio.
Digital sustainability through future AEC tools
Bringing together industry and academia to meet challenges.
Skills gap for net zero highlighted to Minister for Industry
ECA convenes roundtable discussion at Portcullis House.
Evidencing Net Zero with the new UK buildings standard
Pilot version with detailed excel proforma out now!
Scottish Building Safety Levy, in consultation
From direct remediation and the RPDT, to the costs and alternatives.
Waves of warmer homes grants for the rental sector
Boosting energy efficiency standards for all rented homes.
A refocus of the National Planning Policy Framework
Key terms described in brief, as the consultation closes the evening of the 24th.
Fortified farmhouses of the unruly 16th-and 17th-century borders.
ECA shares advice for those who may be exposed to risks.
How to revolutionise UK housing with MMC
CIC and Supply Chain Sustainability School unveil a plan.
From the UKs largest manufacturer and supplier of lime.
From mud bricks to smart concrete
A brief history from 7000BC to a future on the moon.
Regulator of Social Housing publishes latest fire safety report
Covering remediation of 11 metre plus social housing sector buildings.
Apartment and Duplex Defects Remediation Bill 2024
Approved for priority drafting by Government of Ireland.
The long list with in the frame of key historical events.
Competence frameworks for sustainability in the built environment
Code of practice, core criteria consultation draft for comment.
New Floods Resilience Taskforce
With a wet met office autumn prediction.